 |
| |
| Feeding device and take-up device can securely feed even heavy media with the width of 3,250mm (128"). Heavy media weighing over 100kg (220lbs.) can be fed with constant tension by means of tension bar and winding device. |
| Take-up device |
|
Feeding device |
| |
 |
| |
Head gap can be set step-less in 4 positions between 1.5 mm to 7 mm. |
| |
|
The thickness of the media is automatically detected and the height of the head is automatically adjusted to get the designated head gap. Even when the thickness of the media is changed, printing can be made with a constant head gap. This enables the user to always obtain the best printing results. |
 |
| |
[Eco-HS1]
A low odor, environmentally-friendly high solvent ink enhances color reproduction, and uses a new light black ink.
[HS ink]
A solvent ink meeting the needs for high scratch resistance and high-speed high-density printing required for outdoor signboard printing.
[ES3 ink]
A safe and low odor solvent ink that can be used even in general offices without special exhausting facilities. |
|
|
 |
| |
|
Monitoring ink-discharging state from the printing head and ink clogging is quickly detected and cleaned, saving the waste of media and ink. |
 |
| |
| Automatic change of double ink cartridges, which can load up to 1,760cc per color, provides constant print without concern about running out of ink. |
|
|
By mounted large-size Post heater, it enables the media printed at high speed to dry and take up. |
|
|
Media encoder secures stable media feeding without being affected by weight of the media roll. And realizes high quality print. |
|
|
USB2.0 interface supports high-speed data transfer. |
|
|
A small take-up device which can adjust take-up tension is supplied. Even narrow media can be taken up without using a shaft. |
|