Composite materials etc. can be half-cut.
By adjusting the depth of the cutter blade, you can half-cut composite, laminated material (etc). As two tools can be used, you can perform different types of half-cutting or diecutting without changing the tools.
Media is set easily and accurately.
With the aid of a work-guide installed to the directions of X and Y, the positioning of the media is smooth and working efficiency has been improved. It is also possible to remove the work-guide depending on the media size.
1: Effective range of cutting
3: Work-guide plate
4: Origin seal
5: Work-guide pin
*For models with sensor, work-guide plate is used instead of work-guide pin.
*Please note that the work guide is used just as a guide for setting the media and it is not intended to guarantee the distance to the origin.
Thick material can be outline-cut with high accuracy.
With the adoption of a high performance color photo sensor, the round register marks printed on the media are detected and the position of the origin, inclination of coordinate and distance are adjusted.
This enables the operator to perform cutting at the precise position. Further, the sensor recognizes the difference of "color of media" and "color of round register marks", and enables the cutter to perform cuts accurately, while being tailored to the printed material without being influenced by the color of the media. A light pointer that is used as marker when setting the media is provided as standard device and facilitates position adjustment with round register marks.
Extensive line-up of cutter blades.
A wide variety of cutter blades tailored to various media are provided. As one machine can process with flexibility, expand your business opportunities.
Cutter blades in the marketplace can also be used.
As the low cost cutter blades can be used, the running cost can be reduced.