The display will be Local after each print, what should i do?
Answer: Please see the followings:
1. After completing printing, you can set whether to return to Local mode or to
remain in Remote mode. For how to set it, see
“OPERATION MANUAL” -> “Chapter 3” -> “Various settings” -> “Setting the work change”.
When [OFF] is set: Keeps Remote mode after printing.
When [ON] is set: Returns to Local mode after printing.
2. If a warning or error is displayed in Local mode, the machine returns to Local
mode even if OFF is set in “Setting the work change”.
See “OPERATION MANUAL” -> “Chapter 5” -> “Troubles displaying messages” to
clear the warning or error.
The “Setting the work change” function is implemented in Firmware version 1.20